R and V Works FF6 Instructions d'exploitation télécharger pdf (Page 12)

Screws

2 Each

INSTRUCTIONS FOR ATTACHING HOSE AND

REGULATOR ASSEMBLY TO THE FRYER

1. Attach red plate assembly to the tube

flange with two screw and nuts provided.

2. Attach Hose and Regulator to the red

plate assembly using crescent wrench,

with the hose facing away from the ex-

haust stack, tighten snuggly.

3. Attach Thermometer to the front of the

Cajun Fryer by inserting the threads into

the threaded collar as shown, using a

crescent wrench to tighten until snug.

COOKER ASSEMBLY INSTRUCTIONS

Hose and

Regulator

Assembly

Thermometer

Threaded Collar

Flange

Assembly

Red Plate

Assembly

FFIR TABLE ASSEMBLY INSTRUCTIONS

Do not tighten screws until table is fully assembled

STEP 1. BOLT BOTH SIDE

PLATES TO THE

SKID ASSY AS

SHOWN

STEP 2. BOLT THE FRONT AND

REAR BRACE PLATE TO

THE SIDE PLATES USING

THE PROVIDED HOLES.

STEP 3. BOLT THE TABLE

TOP TO THE SIDE

PLATE AS SHOWN

SLOTS ARE FOR

SECURING TANK

WITH A BUNGLE

STRAP

TOOLS REQUIRED:

7/16 WRENCH

PHILLIPS SCEWDRIVER

USE SKOTS TO SECURE THE COOKER TO THE

STAND WITH A 1/4” X 1/2” SCREW AND NUT.

ADJUST TABS TO BE TIGHT ON THE COOKER

AFTER FRYER IS PLACED INTO THE STAND.

1 2 ... 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

R and V Works FF6 Instructions d'exploitation Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Friteuses R and V Works FF6